ALLAH NAMES

ALLAH NAMES

Tuesday, February 15, 2011

Special relativity

USSR postage stamp dedicated to Albert Einstein
Special relativity (SR, also known as the special theory of relativity or STR) is the physical theory of measurement in inertial frames of reference proposed in 1905 by Albert Einstein (after the considerable and independent contributions of Hendrik Lorentz, Henri Poincaré and others) in the paper "On the Electrodynamics of Moving Bodies".[1] It generalizes Galileo's principle of relativity—that all uniform motion is relative, and that there is no absolute and well-defined state of rest (no privileged reference frames)—from mechanics to all the laws of physics, including both the laws of mechanics and of electrodynamics, whatever they may be.[2] Special relativity incorporates the principle that the speed of light is the same for all inertial observers regardless of the state of motion of the source.[3]
This theory has a wide range of consequences which have been experimentally verified,[4] including counter-intuitive ones such as length contraction, time dilation and relativity of simultaneity, contradicting the classical notion that the duration of the time interval between two events is equal for all observers. (On the other hand, it introduces the space-time interval, which is invariant.) Combined with other laws of physics, the two postulates of special relativity predict the equivalence of matter and energy, as expressed in the mass–energy equivalence formula E = mc2, where c is the speed of light in a vacuum.[5][6] The predictions of special relativity agree well with Newtonian mechanics in their common realm of applicability, specifically in experiments in which all velocities are small compared with the speed of light. Special relativity reveals that c is not just the velocity of a certain phenomenon—namely the propagation of electromagnetic radiation (light)—but rather a fundamental feature of the way space and time are unified as spacetime. One of the consequences of the theory is that it is impossible for any particle that has rest mass to be accelerated to the speed of light.
The theory is termed "special" because it applies the principle of relativity only to the special case of inertial reference frames, i.e. frames of reference in uniform relative motion with respect to each other.[7] Einstein developed general relativity to apply the principle in the more general case, that is, to any frame so as to handle general coordinate transformations, and that theory includes the effects of gravity. From the theory of general relativity it follows that special relativity will still apply locally (i.e., to first order),[8] and hence to any relativistic situation where gravity is not a significant factor. Inertial frames should be identified with non-rotating Cartesian coordinate systems constructed around any free falling trajectory as a time axis.

Contents

Postulates

“ Reflections of this type made it clear to me as long ago as shortly after 1900, i.e., shortly after Planck's trailblazing work, that neither mechanics nor electrodynamics could (except in limiting cases) claim exact validity. Gradually I despaired of the possibility of discovering the true laws by means of constructive efforts based on known facts. The longer and the more desperately I tried, the more I came to the conviction that only the discovery of a universal formal principle could lead us to assured results... How, then, could such a universal principle be found? ”
—Albert Einstein: Autobiographical Notes[9]
Einstein discerned two fundamental propositions that seemed to be the most assured, regardless of the exact validity of the (then) known laws of either mechanics or electrodynamics. These propositions were the constancy of the speed of light and the independence of physical laws (especially the constancy of the speed of light) from the choice of inertial system. In his initial presentation of special relativity in 1905 he expressed these postulates as:[1]
  • The Principle of Relativity – The laws by which the states of physical systems undergo change are not affected, whether these changes of state be referred to the one or the other of two systems in uniform translatory motion relative to each other.[1]
  • The Principle of Invariant Light Speed – "... light is always propagated in empty space with a definite velocity [speed] c which is independent of the state of motion of the emitting body." (from the preface).[1] That is, light in vacuum propagates with the speed c (a fixed constant, independent of direction) in at least one system of inertial coordinates (the "stationary system"), regardless of the state of motion of the light source.
The derivation of special relativity depends not only on these two explicit postulates, but also on several tacit assumptions (made in almost all theories of physics), including the isotropy and homogeneity of space and the independence of measuring rods and clocks from their past history.[10]
Following Einstein's original presentation of special relativity in 1905, many different sets of postulates have been proposed in various alternative derivations.[11] However, the most common set of postulates remains those employed by Einstein in his original paper. A more mathematical statement of the Principle of Relativity made later by Einstein, which introduces the concept of simplicity not mentioned above is:
Special principle of relativity: If a system of coordinates K is chosen so that, in relation to it, physical laws hold good in their simplest form, the same laws hold good in relation to any other system of coordinates K' moving in uniform translation relatively to K.[12]
Henri Poincaré provided the mathematical framework for relativity theory by proving that Lorentz transformations are a subset of his Poincaré group of symmetry transformations. Einstein later derived these transformations from his axioms.
Many of Einstein's papers present derivations of the Lorentz transformation based upon these two principles.[13]
Einstein consistently based the derivation of Lorentz invariance (the essential core of special relativity) on just the two basic principles of relativity and light-speed invariance. He wrote:
The insight fundamental for the special theory of relativity is this: The assumptions relativity and light speed invariance are compatible if relations of a new type ("Lorentz transformation") are postulated for the conversion of coordinates and times of events... The universal principle of the special theory of relativity is contained in the postulate: The laws of physics are invariant with respect to Lorentz transformations (for the transition from one inertial system to any other arbitrarily chosen inertial system). This is a restricting principle for natural laws...[9]
Thus many modern treatments of special relativity base it on the single postulate of universal Lorentz covariance, or, equivalently, on the single postulate of Minkowski spacetime.[14][15]
From the principle of relativity alone without assuming the constancy of the speed of light (i.e. using the isotropy of space and the symmetry implied by the principle of special relativity) one can show that the space-time transformations between inertial frames are either Euclidean, Galilean, or Lorentzian. In the Lorentzian case, one can then obtain relativistic interval conservation and a certain finite limiting speed. Experiments suggest that this speed is the speed of light in vacuum.[16][17]
The constancy of the speed of light was motivated by Maxwell's theory of electromagnetism and the lack of evidence for the luminiferous ether but not, contrary to widespread belief, the null result of the Michelson–Morley experiment.[18] However the null result of the Michelson–Morley experiment helped the notion of the constancy of the speed of light gain widespread and rapid acceptance.

Mass–energy equivalence

See also: Mass–energy equivalence
In addition to the papers referenced above—which give derivations of the Lorentz transformation and describe the foundations of special relativity—Einstein also wrote at least four papers giving heuristic arguments for the equivalence (and transmutability) of mass and energy, for E = mc2.
Mass–energy equivalence is a consequence of special relativity. The energy and momentum, which are separate in Newtonian mechanics, form a four-vector in relativity, and this relates the time component (the energy) to the space components (the momentum) in a nontrivial way. For an object at rest, the energy-momentum four-vector is (E, 0, 0, 0): it has a time component which is the energy, and three space components which are zero. By changing frames with a Lorentz transformation in the x direction with a small value of the velocity v, the energy momentum four-vector becomes (E, Ev/c2, 0, 0). The momentum is equal to the energy multiplied by the velocity divided by c2. As such, the Newtonian mass of an object, which is the ratio of the momentum to the velocity for slow velocities, is equal to E/c2.
The energy and momentum are properties of matter, and it is impossible to deduce that they form a four-vector just from the two basic postulates of special relativity by themselves, because these don't talk about matter, they only talk about space and time. The derivation therefore requires some additional physical reasoning. In his 1905 paper, Einstein used the additional principles that Newtonian mechanics should hold for slow velocities, so that there is one energy scalar and one three-vector momentum at slow velocities, and that the conservation law for energy and momentum is exactly true in relativity. Furthermore, he assumed that the energy/momentum of light transforms like the energy/momentum of massless particles, which was known to be true from Maxwell's equations.[19] The first of Einstein's papers on this subject was "Does the Inertia of a Body Depend upon its Energy Content?" in 1905.[20] Although Einstein's argument in this paper is nearly universally accepted by physicists as correct, even self-evident, many authors over the years have suggested that it is wrong.[21] Other authors suggest that the argument was merely inconclusive because it relied on some implicit assumptions.[22]
Einstein acknowledged the controversy over his derivation in his 1907 survey paper on special relativity. There he notes that it is problematic to rely on Maxwell's equations for the heuristic mass–energy argument. The argument in his 1905 paper can be carried out with the emission of any massless particles, but the Maxwell equations are implicitly used to make it obvious that the emission of light in particular can be achieved only by doing work. To emit electromagnetic waves, all you have to do is shake a charged particle, and this is clearly doing work, so that the emission is of energy.[23][24]

Lack of an absolute reference frame

The principle of relativity, which states that there is no preferred inertial reference frame, dates back to Galileo, and was incorporated into Newtonian Physics. However, in the late 19th century, the existence of electromagnetic waves led physicists to suggest that the universe was filled with a substance known as "aether", which would act as the medium through which these waves, or vibrations travelled. The aether was thought to constitute an absolute reference frame against which speeds could be measured, and could be considered fixed and motionless. Aether supposedly had some wonderful properties: it was sufficiently elastic that it could support electromagnetic waves, and those waves could interact with matter, yet it offered no resistance to bodies passing through it. The results of various experiments, including the Michelson–Morley experiment, indicated that the Earth was always 'stationary' relative to the aether–something that was difficult to explain, since the Earth is in orbit around the Sun. Einstein's solution was to discard the notion of an aether and an absolute state of rest. Special relativity is formulated so as to not assume that any particular frame of reference is special; rather, in relativity, any reference frame moving with uniform motion will observe the same laws of physics. In particular, the speed of light in a vacuum is always measured to be c, even when measured by multiple systems that are moving at different (but constant) velocities.

Consequences

Main article: Consequences of special relativity
Einstein has said that all of the consequences of special relativity can be derived from examination of the Lorentz transformations.[citation needed]
These transformations, and hence special relativity, lead to different physical predictions than Newtonian mechanics when relative velocities become comparable to the speed of light. The speed of light is so much larger than anything humans encounter that some of the effects predicted by relativity are initially counter-intuitive:
  • Time dilation – the time lapse between two events is not invariant from one observer to another, but is dependent on the relative speeds of the observers' reference frames (e.g., the twin paradox which concerns a twin who flies off in a spaceship traveling near the speed of light and returns to discover that his or her twin sibling has aged much more).
  • Relativity of simultaneity – two events happening in two different locations that occur simultaneously in the reference frame of one inertial observer, may occur non-simultaneously in the reference frame of another inertial observer (lack of absolute simultaneity).
  • Lorentz contraction – the dimensions (e.g., length) of an object as measured by one observer may be smaller than the results of measurements of the same object made by another observer (e.g., the ladder paradox involves a long ladder traveling near the speed of light and being contained within a smaller garage).
  • Composition of velocities – velocities (and speeds) do not simply 'add', for example if a rocket is moving at 2⁄3 the speed of light relative to an observer, and the rocket fires a missile at 2⁄3 of the speed of light relative to the rocket, the missile does not exceed the speed of light relative to the observer. (In this example, the observer would see the missile travel with a speed of 12⁄13 the speed of light.)
  • Thomas rotation - the orientation of an object (i.e. the alignment of its axes with the observer's axes) may be different for different observers. Unlike other relativistic effects, this effect becomes quite significant at fairly low velocities as can be seen in the spin of moving particles.
  • Inertia and momentum – as an object's speed approaches the speed of light from an observer's point of view, its mass appears to increase thereby making it more and more difficult to accelerate it from within the observer's frame of reference.
  • Equivalence of mass and energy, E = mc2 – The energy content of an object at rest with mass m equals mc2. Conservation of energy implies that in any reaction a decrease of the sum of the masses of particles must be accompanied by an increase in kinetic energies of the particles after the reaction. Similarly, the mass of an object can be increased by taking in kinetic energies.[citation needed]

Reference frames, coordinates and the Lorentz transformation

Main article: Lorentz transformation
Diagram 1. Changing views of spacetime along the world line of a rapidly accelerating observer. In this animation, the vertical direction indicates time and the horizontal direction indicates distance, the dashed line is the spacetime trajectory ("world line") of the observer. The lower quarter of the diagram shows the events that are visible to the observer, and the upper quarter shows the light cone- those that will be able to see the observer. The small dots are arbitrary events in spacetime. The slope of the world line (deviation from being vertical) gives the relative velocity to the observer. Note how the view of spacetime changes when the observer accelerates.
Relativity theory depends on "reference frames". The term reference frame as used here is an observational perspective in space at rest, or in uniform motion, from which a position can be measured along 3 spatial axes. In addition, a reference frame has the ability to determine measurements of the time of events using a 'clock' (any reference device with uniform periodicity).
An event is an occurrence that can be assigned a single unique time and location in space relative to a reference frame: it is a "point" in space-time. Since the speed of light is constant in relativity in each and every reference frame, pulses of light can be used to unambiguously measure distances and refer back the times that events occurred to the clock, even though light takes time to reach the clock after the event has transpired.
For example, the explosion of a firecracker may be considered to be an "event". We can completely specify an event by its four space-time coordinates: The time of occurrence and its 3-dimensional spatial location define a reference point. Let's call this reference frame S.
In relativity theory we often want to calculate the position of a point from a different reference point.
Suppose we have a second reference frame S′, whose spatial axes and clock exactly coincide with that of S at time zero, but it is moving at a constant velocity v with respect to S along the x-axis.
Since there is no absolute reference frame in relativity theory, a concept of 'moving' doesn't strictly exist, as everything is always moving with respect to some other reference frame. Instead, any two frames that move at the same speed in the same direction are said to be comoving. Therefore S and S′ are not comoving.
Let's define the event to have space-time coordinates (t,x,y,z) in system S and (t′,x′,y′,z′) in S′. Then the Lorentz transformation specifies that these coordinates are related in the following way:
\begin{align} t' &= \gamma (t - vx/c^2) \\ x' &= \gamma (x - v t) \\ y' &= y \\ z' &= z , \end{align}
where
\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}}
is the Lorentz factor and c is the speed of light in a vacuum.
The y and z coordinates are unaffected; only the x and t axes transformed. These Lorentz transformations form a one-parameter group of linear mappings, that parameter being called rapidity.
A quantity invariant under Lorentz transformations is known as a Lorentz scalar.
The Lorentz transformation given above is for the particular case in which the velocity v of S′ with respect to S is parallel to the x-axis. We now give the Lorentz transformation in the general case. Suppose the velocity of S′ with respect to S is v. Denote the space-time coordinates of an event in S by (t,r) (instead of (t,x,y,z)). Then the coordinates (t′,r′) of this event in S′ are given by:
\left ( \begin{array}{l} t' \\ \mathbf{r}' \end{array} \right ) =\gamma(\mathbf{v}) \left ( \begin{array}{ll}1 & -\mathbf{v}^T/c^2 \\ -\mathbf{v} & P_{\mathbf{v}}+\alpha_{\mathbf{v}}(I-P_{\mathbf{v}}) \end{array} \right ) \left ( \begin{array}{l} t \\ \mathbf{r} \end{array} \right ),
where vT denotes the transpose of v, α(v) = 1/γ(v), and P(v) denotes the projection onto the direction of v.

Simultaneity

Event B is simultaneous with A in the green reference frame, but it occurred before in the blue frame, and will occur later in the red frame.
Main article: Relativity of simultaneity
From the first equation of the Lorentz transformation in terms of coordinate differences
\Delta t' = \gamma \left(\Delta t - \frac{v \,\Delta x}{c^{2}} \right)
it is clear that two events that are simultaneous in frame S (satisfying Δt = 0), are not necessarily simultaneous in another inertial frame S′ (satisfying Δt′ = 0). Only if these events are colocal in frame S (satisfying Δx = 0), will they be simultaneous in another frame S′.

Time dilation and length contraction

See also: Twin paradox
Writing the Lorentz transformation and its inverse in terms of coordinate differences, where for instance one event has coordinates (x1,t1) and (x'1,t'1), another event has coordinates (x2,t2) and (x'2,t'2), and the differences are defined as Δx = x2 − x1, Δt = t2 − t1, Δx' = x'2 − x'1, Δt' = t'2 − t'1 , we get
\begin{cases} \Delta t' = \gamma \left(\Delta t - \frac{v \,\Delta x}{c^{2}} \right) \\ \Delta x' = \gamma (\Delta x - v \,\Delta t)\, \end{cases}
and
\begin{cases} \Delta t = \gamma \left(\Delta t' + \frac{v \,\Delta x'}{c^{2}} \right) \\ \Delta x = \gamma (\Delta x' + v \,\Delta t')\, \end{cases}
Suppose we have a clock at rest in the unprimed system S. Two different ticks of this clock occur at the same place in the unprimed system, i.e. Δx = 0. If we want to know the relation between the times between these ticks as measured in both systems, we can use the first equation and find:
\Delta t' = \gamma\, \Delta t \qquad ( \, for events satisfying \Delta x = 0 )\,
This shows that the time Δt' between the two ticks as seen in the frame S' is larger than the time Δt between these ticks as measured in the rest frame of the clock. This phenomenon is called time dilation: from the perspective of the S'-system, the clock at rest in the S-system is moving, and moving clocks run slow. Time dilation explains a number of physical phenomena; for example, the decay rate of muons produced by cosmic rays impinging on the Earth's atmosphere.[25]
Similarly, suppose we have a measuring rod at rest in the unprimed system. In this system, the length of this rod is written as Δx. If we want to find the length of this rod as measured in the system S', we must make sure to measure the distances x' to the end points of the rod simultaneously in the primed frame S'. In other words, the measurement is characterized by Δt' = 0, which we can combine with the fourth equation to find the relation between the lengths Δx and Δx':
\Delta x' = \frac{\Delta x}{\gamma} \qquad ( \, for events satisfying \Delta t' = 0 )\,
This shows that the length Δx' of the rod as measured in the frame S' is shorter than the length Δx in its own rest frame. This phenomenon is called length contraction or Lorentz contraction: from the perspective of the S'-system, the rod at rest in the S-system is moving, and moving objects shorten along the direction of motion.
These effects are not merely appearances; they are explicitly related to our way of measuring time intervals between events which occur at the same place in a given coordinate system (called "co-local" events). These time intervals will be different in another coordinate system moving with respect to the first, unless the events are also simultaneous. Similarly, these effects also relate to our measured distances between separated but simultaneous events in a given coordinate system of choice. If these events are not co-local, but are separated by distance (space), they will not occur at the same spatial distance from each other when seen from another moving coordinate system. However, the space-time interval will be the same for all observers. The underlying reality remains the same. Only our perspective changes.

Causality and prohibition of motion faster than light

See also: Causality and Tachyonic antitelephone
Diagram 2. Light cone
In diagram 2 the interval AB is 'time-like'; i.e., there is a frame of reference in which events A and B occur at the same location in space, separated only by occurring at different times. If A precedes B in that frame, then A precedes B in all frames. It is hypothetically possible for matter (or information) to travel from A to B, so there can be a causal relationship (with A the cause and B the effect).
The interval AC in the diagram is 'space-like'; i.e., there is a frame of reference in which events A and C occur simultaneously, separated only in space. However there are also frames in which A precedes C (as shown) and frames in which C precedes A. If it were possible for a cause-and-effect relationship to exist between events A and C, then paradoxes of causality would result. For example, if A was the cause, and C the effect, then there would be frames of reference in which the effect preceded the cause. Although this in itself won't give rise to a paradox, one can show[26][27] that faster than light signals can be sent back into one's own past. A causal paradox can then be constructed by sending the signal if and only if no signal was received previously.
Therefore, if causality is to be preserved, one of the consequences of special relativity is that no information signal or material object can travel faster than light in a vacuum. However, some things can still move faster than light. For example, the location where the beam of a search light hits the bottom of a cloud can move faster than light when the search light is turned rapidly.[28]
Even without considerations of causality, there are other strong reasons why faster-than-light travel is forbidden by special relativity. For example, if a constant force is applied to an object for a limitless amount of time, then integrating F = dp/dt gives a momentum that grows without bound, but this is simply because p = m \gamma v \, approaches infinity as v approaches c. To an observer who is not accelerating, it appears as though the object's inertia is increasing, so as to produce a smaller acceleration in response to the same force. This behavior is in fact observed in particle accelerators.
Theoretical and experimental tunneling studies carried out by Günter Nimtz and Petrissa Eckle claimed that under special conditions signals may travel faster than light.[29][30][31][32] It was measured that fiber digital signals were traveling up to 5 times c and a zero-time tunneling electron carried the information that the atom is ionized, with photons, phonons and electrons spending zero time in the tunneling barrier. According to Nimtz and Eckle, in this superluminal process only the Einstein causality and the Special Relativity but not the primitive causality are violated: Superluminal propagation does not result in any kind of time travel.[33][34] Several scientists have, however, stated not only that Nimtz' interpretations were erroneous, but that the experiment actually provided a trivial experimental confirmation of the Special relativity theory.[35][36][37]

Composition of velocities

Main article: Velocity-addition formula
If the observer in S sees an object moving along the x axis at velocity w, then the observer in the S' system, a frame of reference moving at velocity v in the x direction with respect to S, will see the object moving with velocity w' where
w'=\frac{w-v}{1-wv/c^2}.
This equation can be derived from the space and time transformations above.
w'=\frac{dx'}{dt'}=\frac{\gamma(dx-v dt)}{\gamma(dt-v dx/c^2)}=\frac{(dx/dt)-v}{1-(v/c^2)(dx/dt)}
Notice that if the object were moving at the speed of light in the S system (i.e. w = c), then it would also be moving at the speed of light in the S' system. Also, if both w and v are small with respect to the speed of light, we will recover the intuitive Galilean transformation of velocities: w' \approx w-v.
The usual example given is that of a train (call it system K) travelling due east with a velocity v with respect to the tracks (system K'). A child inside the train throws a baseball due east with a velocity u with respect to the train. In classical physics, an observer at rest on the tracks will measure the velocity of the baseball as v + u. In special relativity, this is no longer true. Instead, an observer on the tracks will measure the velocity of the baseball as \frac{v+u}{1+\frac{vu}{c^2}}. If u and v are small compared to c, then the above expression approaches the classical sum v + u.
More generally, the baseball need not travel in the same direction as the train. To obtain the general formula for Einstein velocity addition, suppose an observer at rest in system K measures the velocity of an object as \mathbf{u}. Let K' be an inertial system such that the relative velocity of K to K' is \mathbf{v}, where \mathbf{u} and \mathbf{v} are now vectors in R3. An observer at rest in K' will then measure the velocity of the object as [16]
\mathbf{v} \oplus_E \mathbf{u}=\frac{\mathbf{v}+\mathbf{u}_{\parallel} + \alpha_{\mathbf{v}}\mathbf{u}_{\perp}}{1+\frac{\mathbf{v}\cdot\mathbf{u}}{c^2}},
where \mathbf{u}_{\parallel} and \mathbf{u}_{\perp} are the components of \mathbf{u} parallel and perpendicular, respectively, to \mathbf{v}, and \alpha_{\mathbf{v}}=\frac{1}{\gamma(\mathbf{v})}=\sqrt{1-\frac{|\mathbf{v}|^2}{c^2}}.
Einstein's addition of colinear velocites is consistent with the Fizeau experiment which determined the speed of light in a fluid moving parallel to the light, but no experiment has ever tested the formula for the general case of non-parallel velocities.

Relativistic mechanics

Further information: Mass in special relativity and Conservation of energy
In addition to modifying notions of space and time, special relativity forces one to reconsider the concepts of mass, momentum, and energy, all of which are important constructs in Newtonian mechanics. Special relativity shows, in fact, that these concepts are all different aspects of the same physical quantity in much the same way that it shows space and time to be interrelated.
There are a couple of (equivalent) ways to define momentum and energy in SR. One method uses conservation laws. If these laws are to remain valid in SR they must be true in every possible reference frame. However, if one does some simple thought experiments using the Newtonian definitions of momentum and energy, one sees that these quantities are not conserved in SR. One can rescue the idea of conservation by making some small modifications to the definitions to account for relativistic velocities. It is these new definitions which are taken as the correct ones for momentum and energy in SR.
The energy and momentum of an object with invariant mass m (also called rest mass in the case of a single particle), moving with velocity v with respect to a given frame of reference, are given by
\begin{array}{r l} E &= \gamma m c^2 \\ \mathbf{p} &= \gamma m \mathbf{v} \end{array}
respectively, where γ (the Lorentz factor) is given by
\gamma = \frac{1}{\sqrt{1 - (v/c)^2}}.
The quantity γm is often called the relativistic mass of the object in the given frame of reference,[38] although recently this concept is falling into disuse, and Lev B. Okun suggested that "this terminology [...] has no rational justification today", and should no longer be taught.[39] Other physicists, including Wolfgang Rindler and T. R. Sandin, have argued that relativistic mass is a useful concept and there is little reason to stop using it.[40] See Mass in special relativity for more information on this debate. Some authors use the symbol m to refer to relativistic mass, and the symbol m0 to refer to rest mass.[41]
The energy and momentum of an object with invariant mass m are related by the formulas
E^2 - (p c)^2 = (m c^2)^2 \,
\mathbf{p} c^2 = E \mathbf{v} \,.
The first is referred to as the relativistic energy-momentum equation. While the energy E and the momentum p depend on the frame of reference in which they are measured, the quantity E2 − (pc)2 is invariant, being equal to the squared invariant mass of the object (up to the multiplicative constant c4).
It should be noted that the invariant mass of a system
m_\text{tot} = \frac {\sqrt{E_\text{tot}^2 - (p_\text{tot}c)^2}} {c^2}
is greater than the sum of the rest masses of the particles it is composed of (unless they are all stationary with respect to the center of mass of the system, and hence to each other). The sum of rest masses is not even always conserved in closed systems, since rest mass may be converted to particles which individually have no mass, such as photons. Invariant mass, however, is conserved and invariant for all observers, so long as the system remains closed. This is because even massless particles contribute invariant mass to systems, as also does the kinetic energy of particles. Thus, even under transformations of rest mass to photons or kinetic energy, the invariant mass of a system which contains these energies still reflects the invariant mass associated with them.

Mass–energy equivalence

Main article: Mass–energy equivalence
For massless particles, m is zero. The relativistic energy-momentum equation still holds, however, and by substituting m with 0, the relation E = pc is obtained; when substituted into Ev = c2p, it gives v = c: massless particles (such as photons) always travel at the speed of light.
A particle which has no rest mass (for example, a photon) can nevertheless contribute to the total invariant mass of a system, since some or all of its momentum is cancelled by another particle, causing a contribution to the system's invariant mass due to the photon's energy. For single photons this does not happen, since the energy and momentum terms exactly cancel.
Looking at the above formula for invariant mass of a system, one sees that, when a single massive object is at rest (v = 0, p = 0), there is a non-zero mass remaining: mrest = E/c2. The corresponding energy, which is also the total energy when a single particle is at rest, is referred to as "rest energy". In systems of particles which are seen from a moving inertial frame, total energy increases and so does momentum. However, for single particles the rest mass remains constant, and for systems of particles the invariant mass remain constant, because in both cases, the energy and momentum increases subtract from each other, and cancel. Thus, the invariant mass of systems of particles is a calculated constant for all observers, as is the rest mass of single particles.

The mass of systems and conservation of invariant mass

For systems of particles, the energy-momentum equation requires summing the momentum vectors of the particles:
E^2 - |\vec{p} \,|^2 c^2 = m^2 c^4
The inertial frame in which the momenta of all particles sums to zero is called the center of momentum frame. In this special frame, the relativistic energy-momentum equation has \vec{p} = 0 \,, and thus gives the invariant mass of the system as merely the total energy of all parts of the system, divided by c2
m = \sum E/c^2
This is the invariant mass of any system which is measured in a frame where it has zero total momentum, such as a bottle of hot gas on a scale. In such a system, the mass which the scale weighs is the invariant mass, and it depends on the total energy of the system. It is thus more than the sum of the rest masses of the molecules, but also includes all the totaled energies in the system as well. Like energy and momentum, the invariant mass of closed systems cannot be changed so long as the system is closed (no mass or energy allowed in or out), because the total relativistic energy of the system remains constant so long as nothing can enter or leave it.
An increase in the energy of such a system which is caused by translating the system to an inertial frame which is not the center of momentum frame, causes an increase in energy and momentum without an increase in invariant mass. E = mc2, however, applies only to closed systems in their center-of-momentum frame where momentum sums to zero.
Taking this formula at face value, we see that in relativity, mass is simply another form of energy. In 1927 Einstein remarked about special relativity, "Under this theory mass is not an unalterable magnitude, but a magnitude dependent on (and, indeed, identical with) the amount of energy."[42]
Einstein was not referring to closed (isolated) systems in this remark, however. For, even in his 1905 paper, which first derived the relationship between mass and energy, Einstein showed that the energy of an object had to be increased for its invariant mass (rest mass) to increase. In such cases, the system is not closed (in Einstein's thought experiment, for example, a mass gives off two photons, which are lost).

Closed (isolated) systems

In a closed system (i.e., in the sense of a totally isolated system) the total energy, the total momentum, and hence the total invariant mass are conserved. Einstein's formula for change in mass translates to its simplest ΔE = Δmc2 form, however, only in non-closed systems in which energy is allowed to escape (for example, as heat and light), and thus invariant mass is reduced. Einstein's equation shows that such systems must lose mass, in accordance with the above formula, in proportion to the energy they lose to the surroundings. Conversely, if one can measure the differences in mass between a system before it undergoes a reaction which releases heat and light, and the system after the reaction when heat and light have escaped, one can estimate the amount of energy which escapes the system. In both nuclear and chemical reactions, such energy represents the difference in binding energies of electrons in atoms (for chemistry) or between nucleons in nuclei (in atomic reactions). In both cases, the mass difference between reactants and (cooled) products measures the mass of heat and light which will escape the reaction, and thus (using the equation) give the equivalent energy of heat and light which may be emitted if the reaction proceeds.
In chemistry, the mass differences associated with the emitted energy are around one-billionth of the molecular mass.[43] However, in nuclear reactions the energies are so large that they are associated with mass differences, which can be estimated in advance, if the products and reactants have been weighed (atoms can be weighed indirectly by using atomic masses, which are always the same for each nuclide). Thus, Einstein's formula becomes important when one has measured the masses of different atomic nuclei. By looking at the difference in masses, one can predict which nuclei have stored energy that can be released by certain nuclear reactions, providing important information which was useful in the development of nuclear energy and, consequently, the nuclear bomb. Historically, for example, Lise Meitner was able to use the mass differences in nuclei to estimate that there was enough energy available to make nuclear fission a favorable process. The implications of this special form of Einstein's formula have thus made it one of the most famous equations in all of science.
Because the E = mc2 equation applies only to isolated systems in their center of momentum frame, it has been popularly misunderstood to mean that mass may be converted to energy, after which the mass disappears. However, popular explanations of the equation as applied to systems include open systems for which heat and light are allowed to escape, when they otherwise would have contributed to the mass (invariant mass) of the system.
Historically, confusion about mass being "converted" to energy has been aided by confusion between mass and "matter", where matter is defined as fermion particles. In such a definition, electromagnetic radiation and kinetic energy (or heat) are not considered "matter." In some situations, matter may indeed be converted to non-matter forms of energy (see above), but in all these situations, the matter and non-matter forms of energy still retain their original mass.
For closed/isolated systems, mass never disappears in the center of momentum frame, because energy cannot disappear. Instead, this equation, in context, means only that when any energy is added to, or escapes from, a system in the center-of-momentum frame, the system will be measured as having gained or lost mass, in proportion to energy added or removed. Thus, in theory, if an atomic bomb were placed in a box strong enough to hold its blast, and detonated upon a scale, the mass of this closed system would not change, and the scale would not move. Only when a transparent "window" was opened in the super-strong plasma-filled box, and light and heat were allowed to escape in a beam, and the bomb components to cool, would the system lose the mass associated with the energy of the blast. In a 21 kiloton bomb, for example, about a gram of light and heat is created. If this heat and light were allowed to escape, the remains of the bomb would lose a gram of mass, as it cooled. In this thought-experiment, the light and heat carry away the gram of mass, and would therefore deposit this gram of mass in the objects that absorb them.[44]

Force

In special relativity, Newton's second law does not hold in its form F = ma, but it does if it is expressed as
\mathbf{F} = \frac{d\mathbf{p}}{dt}
where p is the momentum as defined above ( \mathbf{p}= \gamma m \mathbf{v} ) and "m" is the invariant mass. Thus, the force is given by
\mathbf{F} = m \frac{d(\gamma \, \mathbf{v})}{dt} = m \left( \frac{d \gamma}{dt} \, \mathbf{v} + \gamma \frac{d\mathbf{v}}{dt} \right).
Carrying out the derivatives gives
\mathbf{F} = \frac{\gamma^3 m v}{c^2} \frac{dv}{dt} \, \mathbf{v} + \gamma m\, \mathbf{a}
which, taking into account the identity v \tfrac{dv}{dt}= \mathbf{v} \cdot \mathbf{a} , can also be expressed as
\mathbf{F} = \frac{\gamma^3 m \left( \mathbf{v} \cdot \mathbf{a} \right)}{c^2} \, \mathbf{v} + \gamma m\, \mathbf{a}.
If the acceleration is separated into the part parallel to the velocity and the part perpendicular to it, one gets
\mathbf{F} = \frac{\gamma^3 m v^{2}}{c^2} \, \mathbf{a}_{\parallel} + \gamma m \, (\mathbf{a}_{\parallel} + \mathbf{a}_{\perp}) \,
= \gamma^3 m \left( \frac{v^2}{c^2} + \frac{1}{\gamma^2} \right) \mathbf{a}_{\parallel} + \gamma m \, \mathbf{a}_{\perp} \,
= \gamma^3 m \left( \frac{v^{2}}{c^2} + 1 - \frac{v^{2}}{c^2} \right) \mathbf{a}_{\parallel} + \gamma m \, \mathbf{a}_{\perp} \,
= \gamma^3 m \, \mathbf{a}_{\parallel} + \gamma m \, \mathbf{a}_{\perp} \,.
Consequently in some old texts, γ3m is referred to as the longitudinal mass, and γm is referred to as the transverse mass, which is the same as the relativistic mass. See mass in special relativity.
For the four-force, see below.

Kinetic energy

The Work-energy Theorem says[45] the change in kinetic energy is equal to the work done on the body, that is
\begin{align} \Delta K = W &= \int_{\mathbf{r}_0}^{\mathbf{r}_1} \mathbf{F} \cdot d\mathbf{r} \\ &= \int_{t_0}^{t_1} \frac{d}{dt}(\gamma m\mathbf{v})\cdot\mathbf{v}dt \\ &= \left. \gamma m \mathbf{v} \cdot \mathbf{v} \right|^{t_1}_{t_0} - \int_{t_0}^{t_1} \gamma m\mathbf{v} \cdot \frac{d\mathbf{v}}{dt} dt \\ &= \left. \gamma m v^2 \right|^{t_1}_{t_0} - m\int_{v_0}^{v_1} \gamma v\,dv \\ &= m \left( \left. \gamma v^2 \right|^{t_1}_{t_0} - c^2\int_{v_0}^{v_1} \frac{2v/c^2}{2\sqrt{1-v^2/c^2}}\,dv \right) \\ &= \left. m\left(\frac {v^2}{\sqrt{1-v^2/c^2}} + c^2 \sqrt{1-v^2/c^2} \right) \right|^{t_1}_{t_0} \\ &= \left. \frac {mc^2}{\sqrt{1-v^2/c^2}} \right|^{t_1}_{t_0} \\ &= \left. {\gamma mc^2}\right|^{t_1}_{t_0} \\ &= \gamma_1 mc^2 - \gamma_0 mc^2.\end{align}
If in the initial state the body was at rest (γ0 = 1) and in the final state it has speed v (γ1 = γ), the kinetic energy is K = (γ − 1)mc2, a result that can be directly obtained by subtracting the rest energy mc2 from the total relativistic energy γmc2.

A useful application: motion in cyclotrons


 This section may stray from the topic of the article. Please help improve this section or discuss this issue on the talk page. (January 2011)
It has been suggested that this article or section be merged into Cyclotron. (Discuss)
The application of the above in cyclotrons is immediate:[46][47][48][49][50][51][52][53][54][55][56]
\frac {dW}{dt}=mc^2 \frac{d \gamma}{dt}
In the presence of a magnetic field only, the Lorentz force is:
\mathbf{F}=q \mathbf{v \times B}
Since:
\frac {dW}{dt}=\mathbf{F \cdot v}=0
it follows that:
\frac{d \gamma}{dt}=0
meaning that γ is constant, and so is v. This is instrumental in solving the equation of motion for a charge particle of charge q in a magnetic field of induction B as follows:
\mathbf{F}=\frac{d \gamma m_0 \mathbf{v}}{dt}=\gamma m_0 \frac{d \mathbf{v}}{dt}
On the other hand:
\mathbf{F}=q \mathbf{v \times B}
Thus:
\gamma m_0 \frac{d \mathbf{v}}{dt}=q \mathbf{v \times B}
Separating by components, we obtain:
qBv_y=\gamma m_0 \frac{d v_x}{dt}
-qBv_x=\gamma m_0 \frac{d v_y}{dt}
0=\gamma m_0 \frac{d v_z}{dt}
The solutions are:
v_x = r \omega \cos(\omega t)\
v_y = - r \omega \sin(\omega t)\
\omega=\frac{qB}{\gamma(v_0) m_0}
By integrating one more time with respect to t the differential equations above we obtain the equations of motion: a circle of radius r=\frac{\gamma(v_0)m_0v_0}{qB} in the plane z=constant, where v0 is the initial speed of the particle entering the cyclotron. Notice that this calculation ignores the Abraham-Lorentz force which is the reaction to the emission of electromagnetic radiation by the particle. If the speed is held constant by applying an electric field, then the magnitude of the acceleration is constant, a = \frac{{v_0}^2}{r}\,, but its direction keeps changing in a cyclotron. The jerk is proportional with the second time derivative of speed:
\frac{d^2 v_x}{dt^2} = -r \omega^3 \cos(\omega t)
\frac{d^2 v_y}{dt^2} = r \omega^3 \sin(\omega t)
Because the jerk is directed opposite to the velocity, the Abraham-Lorentz force tends to slow the particle down. Note that the Abraham-Lorentz force is much smaller than the Lorentz force:
\mathbf{F}_\mathrm{rad} = \frac{\mu_0 q^2}{6 \pi c} \mathbf{\dot{a}} = - \frac{\mu_0 q^4 B^2}{6 \pi c \gamma^2 {m_0}^2} \mathbf{v} \,
\frac{F_{rad}}{F_{Lorentz}}=\frac{\mu_0 q^3 B}{6 \pi c \gamma^2 {m_0}^2}\approx \frac{1.1\times 10^{-12}}{\gamma^2}\frac{B}{1~\mathrm{T}} for electrons,
so, it can be ignored in most computations.

Classical limit

Notice that γ can be expanded into a Taylor series or binomial series for \frac{v^2}{c^2} < 1, obtaining:
\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}} = \sum_{n=0}^{\infty} \prod_{k=1}^n \frac{(2k - 1)}{2k} \frac{v^2}{c^2} = 1 + \frac{1}{2} \frac{v^2}{c^2} + \frac{3}{8} \frac{v^4}{c^4} + \frac{5}{16} \frac{v^6}{c^6} + \ldots
and consequently
E - m c^2 = \frac{1}{2} m v^2 + \frac{3}{8} \frac{m v^4}{c^2} + \frac{5}{16} \frac{m v^6}{c^4} + \ldots ;
\mathbf{p} = m \mathbf{v} + \frac{1}{2} \frac{m v^2 \mathbf{v}}{c^2} + \frac{3}{8} \frac{m v^4 \mathbf{v}}{c^4} + \frac{5}{16} \frac{m v^6 \mathbf{v}}{c^6} + \cdots .
For velocities much smaller than that of light, one can neglect the terms with c2 and higher in the denominator. These formulas then reduce to the standard definitions of Newtonian kinetic energy and momentum. This is as it should be, for special relativity must agree with Newtonian mechanics at low velocities.

The geometry of space-time

Main article: Minkowski space
SR uses a 'flat' 4-dimensional Minkowski space, which is an example of a space-time. This space, however, is very similar to the standard 3 dimensional Euclidean space.
The differential of distance (ds) in cartesian 3D space is defined as:
ds^2 = dx_1^2 + dx_2^2 + dx_3^2
where (dx1,dx2,dx3) are the differentials of the three spatial dimensions. In the geometry of special relativity, a fourth dimension is added, derived from time, so that the equation for the differential of distance becomes:
ds^2 = dx_1^2 + dx_2^2 + dx_3^2 - c^2 dt^2 .
If we wished to make the time coordinate look like the space coordinates, we could treat time as imaginary: x4 = ict . In this case the above equation becomes symmetric:
ds^2 = dx_1^2 + dx_2^2 + dx_3^2 + dx_4^2 .
This suggests what is in fact a profound theoretical insight as it shows that special relativity is simply a rotational symmetry of our space-time, very similar to rotational symmetry of Euclidean space.[citation needed] Just as Euclidean space uses a Euclidean metric, so space-time uses a Minkowski metric. Basically, SR can be stated in terms of the invariance of space-time interval (between any two events) as seen from any inertial reference frame. All equations and effects of special relativity can be derived from this rotational symmetry (the Poincaré group) of Minkowski space-time. According to Misner (1971 §2.3), ultimately the deeper understanding of both special and general relativity will come from the study of the Minkowski metric (described below) rather than a "disguised" Euclidean metric using ict as the time coordinate.
If we reduce the spatial dimensions to 2, so that we can represent the physics in a 3-D space
ds^2 = dx_1^2 + dx_2^2 - c^2 dt^2 ,
we see that the null geodesics lie along a dual-cone:
Sr1.svg
defined by the equation
ds^2 = 0 = dx_1^2 + dx_2^2 - c^2 dt^2
or simply
dx_1^2 + dx_2^2 = c^2 dt^2 ,
which is the equation of a circle of radius c dt. If we extend this to three spatial dimensions, the null geodesics are the 4-dimensional cone:
Sr3.jpg
ds^2 = 0 = dx_1^2 + dx_2^2 + dx_3^2 - c^2 dt^2
dx_1^2 + dx_2^2 + dx_3^2 = c^2 dt^2 .
This null dual-cone represents the "line of sight" of a point in space. That is, when we look at the stars and say "The light from that star which I am receiving is X years old", we are looking down this line of sight: a null geodesic. We are looking at an event a distance d = \sqrt{x_1^2+x_2^2+x_3^2} away and a time d/c in the past. For this reason the null dual cone is also known as the 'light cone'. (The point in the lower left of the picture below represents the star, the origin represents the observer, and the line represents the null geodesic "line of sight".)
Sr1.svg
The cone in the -t region is the information that the point is 'receiving', while the cone in the +t section is the information that the point is 'sending'.
The geometry of Minkowski space can be depicted using Minkowski diagrams, which are useful also in understanding many of the thought-experiments in special relativity.

Physics in spacetime

Here, we see how to write the equations of special relativity in a manifestly Lorentz covariant form. The position of an event in spacetime is given by a contravariant four vector whose components are:
x^\nu=\left(ct, x, y, z\right)
where x1 = x and x2 = y and x3 = z as usual. We define x0 = ct so that the time coordinate has the same dimension of distance as the other spatial dimensions; in accordance with the general principle that space and time are treated equally, so far as possible.[57][58][59] Superscripts are contravariant indices in this section rather than exponents except when they indicate a square. Subscripts are covariant indices which also range from zero to three as with the spacetime gradient of a field φ:
\partial_0 \phi = \frac{1}{c}\frac{\partial \phi}{\partial t}, \quad \partial_1 \phi = \frac{\partial \phi}{\partial x}, \quad \partial_2 \phi = \frac{\partial \phi}{\partial y}, \quad \partial_3 \phi = \frac{\partial \phi}{\partial z}.

Metric and transformations of coordinates

Having recognised the four-dimensional nature of spacetime, we are driven to employ the Minkowski metric, η, given in components (valid in any inertial reference frame) as:
\eta_{\alpha\beta} = \begin{pmatrix} -1 & 0 & 0 & 0\\ 0 & 1 & 0 & 0\\ 0 & 0 & 1 & 0\\ 0 & 0 & 0 & 1 \end{pmatrix}
which is equal to its reciprocal, ηαβ, in those frames.
Then we recognize that coordinate transformations between inertial reference frames are given by the Lorentz transformation tensor Λ. For the special case of motion along the x-axis, we have:
\Lambda^{\mu'}{}_\nu = \begin{pmatrix} \gamma & -\beta\gamma & 0 & 0\\ -\beta\gamma & \gamma & 0 & 0\\ 0 & 0 & 1 & 0\\ 0 & 0 & 0 & 1 \end{pmatrix}
which is simply the matrix of a boost (like a rotation) between the x and ct coordinates. Where μ' indicates the row and ν indicates the column. Also, β and γ are defined as:
\beta = \frac{v}{c},\ \gamma = \frac{1}{\sqrt{1-\beta^2}}.
More generally, a transformation from one inertial frame (ignoring translations for simplicity) to another must satisfy:
\eta_{\alpha\beta} = \eta_{\mu'\nu'} \Lambda^{\mu'}{}_\alpha \Lambda^{\nu'}{}_\beta \!
where there is an implied summation of \mu' \! and \nu' \! from 0 to 3 on the right-hand side in accordance with the Einstein summation convention. The Poincaré group is the most general group of transformations which preserves the Minkowski metric and this is the physical symmetry underlying special relativity.
All proper physical quantities are given by tensors. So to transform from one frame to another, we use the well-known tensor transformation law
T^{\left[i_1',i_2',\dots,i_p'\right]}_{\left[j_1',j_2',\dots,j_q'\right]} = \Lambda^{i_1'}{}_{i_1}\Lambda^{i_2'}{}_{i_2}\cdots\Lambda^{i_p'}{}_{i_p} \Lambda_{j_1'}{}^{j_1}\Lambda_{j_2'}{}^{j_2}\cdots\Lambda_{j_q'}{}^{j_q} T^{\left[i_1,i_2,\dots,i_p\right]}_{\left[j_1,j_2,\dots,j_q\right]}
Where \Lambda_{j_k'}{}^{j_k} \! is the reciprocal matrix of \Lambda^{j_k'}{}_{j_k} \!.
To see how this is useful, we transform the position of an event from an unprimed coordinate system S to a primed system S', we calculate
\begin{pmatrix} ct'\\ x'\\ y'\\ z' \end{pmatrix} = x^{\mu'}=\Lambda^{\mu'}{}_\nu x^\nu= \begin{pmatrix} \gamma & -\beta\gamma & 0 & 0\\ -\beta\gamma & \gamma & 0 & 0\\ 0 & 0 & 1 & 0\\ 0 & 0 & 0 & 1 \end{pmatrix} \begin{pmatrix} ct\\ x\\ y\\ z \end{pmatrix} = \begin{pmatrix} \gamma ct- \gamma\beta x\\ \gamma x - \beta \gamma ct \\ y\\ z \end{pmatrix}
which is the Lorentz transformation given above. All tensors transform by the same rule.
The squared length of the differential of the position four-vector dx^\mu \! constructed using
\mathbf{dx}^2 = \eta_{\mu\nu}\,dx^\mu \,dx^\nu = -(c \cdot dt)^2+(dx)^2+(dy)^2+(dz)^2\,
is an invariant. Being invariant means that it takes the same value in all inertial frames, because it is a scalar (0 rank tensor), and so no Λ appears in its trivial transformation. Notice that when the line element \mathbf{dx}^2 is negative that d\tau=\sqrt{-\mathbf{dx}^2} / c is the differential of proper time, while when \mathbf{dx}^2 is positive, \sqrt{\mathbf{dx}^2} is differential of the proper distance.
The primary value of expressing the equations of physics in a tensor form is that they are then manifestly invariant under the Poincaré group, so that we do not have to do a special and tedious calculation to check that fact. Also in constructing such equations we often find that equations previously thought to be unrelated are, in fact, closely connected being part of the same tensor equation.

Velocity and acceleration in 4D

Recognising other physical quantities as tensors also simplifies their transformation laws. First note that the velocity four-vector Uμ is given by
U^\mu = \frac{dx^\mu}{d\tau} = \begin{pmatrix} \gamma c \\ \gamma v_x \\ \gamma v_y \\ \gamma v_z \end{pmatrix}
Recognising this, we can turn the awkward looking law about composition of velocities into a simple statement about transforming the velocity four-vector of one particle from one frame to another. Uμ also has an invariant form:
{\mathbf U}^2 = \eta_{\nu\mu} U^\nu U^\mu = -c^2 .
So all velocity four-vectors have a magnitude of c. This is an expression of the fact that there is no such thing as being at coordinate rest in relativity: at the least, you are always moving forward through time. The acceleration 4-vector is given by A^\mu = d{\mathbf U^\mu}/d\tau. Given this, differentiating the above equation by τ produces
2\eta_{\mu\nu}A^\mu U^\nu = 0. \!
So in relativity, the acceleration four-vector and the velocity four-vector are orthogonal.

Momentum in 4D

The momentum and energy combine into a covariant 4-vector:
p_\nu = m \,\, \eta_{\nu\mu} U^\mu = \begin{pmatrix} -E/c \\ p_x\\ p_y\\ p_z\end{pmatrix}.
where m is the invariant mass.
The invariant magnitude of the momentum 4-vector is:
\mathbf{p}^2 = \eta^{\mu\nu}p_\mu p_\nu = -(E/c)^2 + p^2 .
We can work out what this invariant is by first arguing that, since it is a scalar, it doesn't matter which reference frame we calculate it, and then by transforming to a frame where the total momentum is zero.
\mathbf{p}^2 = - (E_{rest}/c)^2 = - (m \cdot c)^2 .
We see that the rest energy is an independent invariant. A rest energy can be calculated even for particles and systems in motion, by translating to a frame in which momentum is zero.
The rest energy is related to the mass according to the celebrated equation discussed above:
E_{rest} = m c^2\,
Note that the mass of systems measured in their center of momentum frame (where total momentum is zero) is given by the total energy of the system in this frame. It may not be equal to the sum of individual system masses measured in other frames.

Force in 4D

To use Newton's third law of motion, both forces must be defined as the rate of change of momentum with respect to the same time coordinate. That is, it requires the 3D force defined above. Unfortunately, there is no tensor in 4D which contains the components of the 3D force vector among its components.
If a particle is not traveling at c, one can transform the 3D force from the particle's co-moving reference frame into the observer's reference frame. This yields a 4-vector called the four-force. It is the rate of change of the above energy momentum four-vector with respect to proper time. The covariant version of the four-force is:
F_\nu = \frac{d p_{\nu}}{d \tau} = \begin{pmatrix} -{d (E/c)}/{d \tau} \\ {d p_x}/{d \tau} \\ {d p_y}/{d \tau} \\ {d p_z}/{d \tau} \end{pmatrix}
where \tau \, is the proper time.
In the rest frame of the object, the time component of the four force is zero unless the "invariant mass" of the object is changing (this requires a non-closed system in which energy/mass is being directly added or removed from the object) in which case it is the negative of that rate of change of mass, times c. In general, though, the components of the four force are not equal to the components of the three-force, because the three force is defined by the rate of change of momentum with respect to coordinate time, i.e. \frac{d p}{d t} while the four force is defined by the rate of change of momentum with respect to proper time, i.e. \frac{d p} {d \tau} .
In a continuous medium, the 3D density of force combines with the density of power to form a covariant 4-vector. The spatial part is the result of dividing the force on a small cell (in 3-space) by the volume of that cell. The time component is −1/c times the power transferred to that cell divided by the volume of the cell. This will be used below in the section on electromagnetism.

Relativity and unifying electromagnetism

Main article: Classical electromagnetism and special relativity
Theoretical investigation in classical electromagnetism led to the discovery of wave propagation. Equations generalizing the electromagnetic effects found that finite propagation-speed of the E and B fields required certain behaviors on charged particles. The general study of moving charges forms the Liénard–Wiechert potential, which is a step towards special relativity.
The Lorentz transformation of the electric field of a moving charge into a non-moving observer's reference frame results in the appearance of a mathematical term commonly called the magnetic field. Conversely, the magnetic field generated by a moving charge disappears and becomes a purely electrostatic field in a comoving frame of reference. Maxwell's equations are thus simply an empirical fit to special relativistic effects in a classical model of the Universe. As electric and magnetic fields are reference frame dependent and thus intertwined, one speaks of electromagnetic fields. Special relativity provides the transformation rules for how an electromagnetic field in one inertial frame appears in another inertial frame.

Electromagnetism in 4D

Main article: Covariant formulation of classical electromagnetism
Maxwell's equations in the 3D form are already consistent with the physical content of special relativity. But we must rewrite them to make them manifestly invariant.[60]
The charge density \rho \! and current density [J_x,J_y,J_z] \! are unified into the current-charge 4-vector:
J^\mu = \begin{pmatrix} \rho c \\ J_x\\ J_y\\ J_z\end{pmatrix}.
The law of charge conservation, \frac{\partial \rho} {\partial t} + \nabla \cdot \mathbf{J} = 0, becomes:
\partial_\mu J^\mu = 0. \!
The electric field [E_x,E_y,E_z] \! and the magnetic induction [B_x,B_y,B_z] \! are now unified into the (rank 2 antisymmetric covariant) electromagnetic field tensor:
F_{\mu\nu} = \begin{pmatrix} 0 & -E_x/c & -E_y/c & -E_z/c \\ E_x/c & 0 & B_z & -B_y \\ E_y/c & -B_z & 0 & B_x \\ E_z/c & B_y & -B_x & 0 \end{pmatrix}.
The density, f_\mu \!, of the Lorentz force, \mathbf{f} = \rho \mathbf{E} + \mathbf{J} \times \mathbf{B}, exerted on matter by the electromagnetic field becomes:
f_\mu = F_{\mu\nu}J^\nu .\!
Faraday's law of induction, \nabla \times \mathbf{E} = -\frac{\partial \mathbf{B}} {\partial t}, and Gauss's law for magnetism, \nabla \cdot \mathbf{B} = 0, combine to form:
\partial_\lambda F_{\mu\nu}+ \partial _\mu F_{\nu \lambda}+ \partial_\nu F_{\lambda \mu} = 0. \!
Although there appear to be 64 equations here, it actually reduces to just four independent equations. Using the antisymmetry of the electromagnetic field one can either reduce to an identity (0=0) or render redundant all the equations except for those with λ,μ,ν = either 1,2,3 or 2,3,0 or 3,0,1 or 0,1,2.
The electric displacement [D_x,D_y,D_z] \! and the magnetic field [H_x,H_y,H_z] \! are now unified into the (rank 2 antisymmetric contravariant) electromagnetic displacement tensor:
\mathcal{D}^{\mu\nu} = \begin{pmatrix} 0 & D_xc & D_yc & D_zc \\ -D_xc & 0 & H_z & -H_y \\ -D_yc & -H_z & 0 & H_x \\ -D_zc & H_y & -H_x & 0 \end{pmatrix}.
Ampère's law, \nabla \times \mathbf{H} = \mathbf{J} + \frac{\partial \mathbf{D}} {\partial t}, and Gauss's law, \nabla \cdot \mathbf{D} = \rho, combine to form:
\partial_\nu \mathcal{D}^{\mu \nu} = J^{\mu}. \!
In a vacuum, the constitutive equations are:
\mu_0 \mathcal{D}^{\mu \nu} = \eta^{\mu \alpha} F_{\alpha \beta} \eta^{\beta \nu} \,.
Antisymmetry reduces these 16 equations to just six independent equations. Because it is usual to define F^{\mu \nu}\, by
F^{\mu \nu} = \eta^{\mu \alpha} F_{\alpha \beta} \eta^{\beta \nu} \,
the constitutive equations may, in a vacuum, be combined with Ampère's law etc. to get:
\partial_\beta F^{\alpha \beta} = \mu_0 J^{\alpha}. \!
The energy density of the electromagnetic field combines with Poynting vector and the Maxwell stress tensor to form the 4D electromagnetic stress-energy tensor. It is the flux (density) of the momentum 4-vector and as a rank 2 mixed tensor it is:
T_\alpha^\pi = F_{\alpha\beta} \mathcal{D}^{\pi\beta} - \frac{1}{4} \delta_\alpha^\pi F_{\mu\nu} \mathcal{D}^{\mu\nu}
where \delta_\alpha^\pi is the Kronecker delta. When upper index is lowered with η, it becomes symmetric and is part of the source of the gravitational field.
The conservation of linear momentum and energy by the electromagnetic field is expressed by:
f_\mu + \partial_\nu T_\mu^\nu = 0\!
where f_\mu \! is again the density of the Lorentz force. This equation can be deduced from the equations above (with considerable effort).

Status

Main article: Status of special relativity
Special relativity in its Minkowski spacetime is accurate only when the absolute value of the gravitational potential is much less than c2 in the region of interest.[61] In a strong gravitational field, one must use general relativity. General relativity becomes special relativity at the limit of weak field. At very small scales, such as at the Planck length and below, quantum effects must be taken into consideration resulting in quantum gravity. However, at macroscopic scales and in the absence of strong gravitational fields, special relativity is experimentally tested to extremely high degree of accuracy (10−20)[62] and thus accepted by the physics community. Experimental results which appear to contradict it are not reproducible and are thus widely believed to be due to experimental errors.
Special relativity is mathematically self-consistent, and it is an organic part of all modern physical theories, most notably quantum field theory, string theory, and general relativity (in the limiting case of negligible gravitational fields).
Newtonian mechanics mathematically follows from special relativity at small velocities (compared to the speed of light) — thus Newtonian mechanics can be considered as a special relativity of slow moving bodies. See Status of special relativity for a more detailed discussion.
Several experiments predating Einstein's 1905 paper are now interpreted as evidence for relativity. Of these it is known Einstein was aware of the Fizeau experiment before 1905,[citation needed] and historians have concluded that Einstein was at least aware of the Michelson–Morley experiment as early as 1899 despite claims he made in his later years that it played no role in his development of the theory.[63]
  • The Fizeau experiment (1851, repeated by Michelson and Morley in 1886) measured the speed of light in moving media, with results that are consistent with relativistic addition of colinear velocities.
  • The famous Michelson–Morley experiment (1881, 1887) gave further support to the postulate that detecting an absolute reference velocity was not achievable. It should be stated here that, contrary to many alternative claims, it said little about the invariance of the speed of light with respect to the source and observer's velocity, as both source and observer were travelling together at the same velocity at all times.
  • The Trouton–Noble experiment (1903) showed that the torque on a capacitor is independent of position and inertial reference frame.
  • The Experiments of Rayleigh and Brace‎ (1902, 1904) showed that length contraction doesn't lead to birefringence for a co-moving observer, in accordance with the relativity principle.
A number of experiments have been conducted to test special relativity against rival theories. These include:
In addition, particle accelerators routinely accelerate and measure the properties of particles moving at near the speed of light, where their behavior is completely consistent with relativity theory and inconsistent with the earlier Newtonian mechanics. These machines would simply not work if they were not engineered according to relativistic principles.

Relativistic quantum mechanics

In contrast to General relativity, where it is an unsolved question, whether - and if so how - this theory can be merged with quantum physics to a unified theory of quantum gravitation, the tools of special-relativistic quantum theory are well-developed in the form of the Dirac theory[64] . Even the early Bohr-Sommerfeld atomic model explained the fine structure of alkaline atoms by using both special relativity and the preliminary knowledge on quantum mechanics of the time.
Paul Dirac developed a wave equation - the Dirac equation - fully compatible both with special relativity and with the final version of quantum theory existing after 1926. This theory explained not only the intrinsic angular momentum of the electrons called spin, a property which can only be stated, but not explained by non-relativistic quantum mechanics, but, when properly quantized, led to the prediction of the antiparticle of the electron, the positron.[64][65] Also the fine structure could finally not be explained without special relativity.
On the other hand, the existence of antiparticles makes obvious that one is not dealing with a naive unification of special relativity and quantum mechanics. Instead a theory is necessary, where one is dealing with quantized fields, and where particles can be created and destroyed, as in quantum electrodynamics or quantum chromodynamics.
These elements merge together in the standard model of particle physics, and this theory, the standard theory of relativistic quantized fields,[66] unifying the principles of special relativity and of quantum physics, belongs actually to the most ambitious, and the most active one (see citations in the article "Standard Model").
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)