ALLAH NAMES

Thursday, February 24, 2011

Cotton

Cotton bolls ready for harvest
Picking cotton in Oklahoma, USA, in the 1890s
Cotton fibers viewed under a scanning electron microscope
Cotton is a soft, fluffy staple fiber that grows in a boll, or protective capsule, around the seeds of cotton plants of the genus Gossypium. The plant is a shrub native to tropical and subtropical regions around the world, including the Americas, Africa, India, and Pakistan. The fiber most often is spun into yarn or thread and used to make a soft, breathable textile, which is the most widely used natural-fiber cloth in clothing today. The English name derives from the Arabic (al) qutn قُطْن , which began to be used circa 1400.[1] The botanical purpose of cotton fiber is to aid in seed dispersal.

Contents

  • 1 History
    • 1.1 Industrial revolution in Britain
    • 1.2 Tangüis cotton
  • 2 Cultivation
    • 2.1 Genetic modification
    • 2.2 Organic production
  • 3 Pests and weeds
  • 4 Harvesting
  • 5 Competition from synthetic fibers
  • 6 Uses
  • 7 International trade
    • 7.1 Leading producer countries
    • 7.2 Fair trade
    • 7.3 Trade
  • 8 Critical temperatures
  • 9 British standard yarn measures
  • 10 Fiber properties
  • 11 Cotton genome

History

Cotton plants as imagined and drawn by John Mandeville in the 14th century
According to the Foods and Nutrition Encyclopedia, the earliest cultivation of cotton discovered thus far in the Americas occurred in Mexico, some 8,000 years ago.[citation needed] The indigenous species was Gossypium hirsutum, which is today the most widely planted species of cotton in the world, constituting about 89.9% of all production worldwide. The greatest diversity of wild cotton species is found in Mexico, followed by Australia and Africa.[2]
Cotton was first cultivated in the Old World 7,000 years ago (5th–4th millennia BC), by the inhabitants of the Indus Valley Civilization, which covered a huge swath of the northwestern part of the Indian subcontinent, comprising today parts of eastern Pakistan and northwestern India.[3] The Indus cotton industry was well developed and some methods used in cotton spinning and fabrication continued to be used until the modern industrialization of India.[4] Well before the Common Era, the use of cotton textiles had spread from India to the Mediterranean and beyond.[5]
Greeks and the Arabs were apparently ignorant about cotton until the Wars of Alexander the Great, as his contemporary Megasthenes told Seleucus I Nicator of "there being trees on which wool grows" in "Indica".
According to The Columbia Encyclopedia, Sixth Edition:[6]
Cotton has been spun, woven, and dyed since prehistoric times. It clothed the people of ancient India, Egypt, and China. Hundreds of years before the Christian era, cotton textiles were woven in India with matchless skill, and their use spread to the Mediterranean countries. In the first century, Arab traders brought fine muslin and calico to Italy and Spain. The Moors introduced the cultivation of cotton into Spain in the 9th century. Fustians and dimities were woven there and in the 14th century in Venice and Milan, at first with a linen warp. Little cotton cloth was imported to England before the 15th century, although small amounts were obtained chiefly for candlewicks. By the 17th century, the East India Company was bringing rare fabrics from India. Native Americans skillfully spun and wove cotton into fine garments and dyed tapestries. Cotton fabrics found in Peruvian tombs are said to belong to a pre-Inca culture.
In Iran (Persia), the history of cotton dates back to the Achaemenid era (5th century BC); however, there are few sources about the planting of cotton in pre-Islamic Iran. The planting of cotton was common in Merv, Ray and Pars of Iran. In the poems of Persian poets, especially Ferdowsi's Shahname, there are many references to cotton ("panbe" in Persian). Marco Polo (13th century) refers to the major products of Persia, including cotton. John Chardin, a famous French traveler of 17th century, who had visited the Safavid Persia, has approved the vast cotton farms of Persia.[7]
In Peru, cultivation of the indigenous cotton species Gossypium barbadense was the backbone of the development of coastal cultures, such as the Norte Chico, Moche and Nazca. Cotton was grown upriver, made into nets and traded with fishing villages along the coast for large supplies of fish. The Spanish who came to Mexico and Peru in the early 16th century found the people growing cotton and wearing clothing made of it.
During the late medieval period, cotton became known as an imported fiber in northern Europe, without any knowledge of how it was derived, other than that it was a plant; noting its similarities to wool, people in the region could only imagine that cotton must be produced by plant-borne sheep. John Mandeville, writing in 1350, stated as fact the now-preposterous belief: "There grew there [India] a wonderful tree which bore tiny lambs on the endes of its branches. These branches were so pliable that they bent down to allow the lambs to feed when they are hungrie [sic]." (See Vegetable Lamb of Tartary.) This aspect is retained in the name for cotton in many European languages, such as German Baumwolle, which translates as "tree wool" (Baum means "tree"; Wolle means "wool"). By the end of the 16th century, cotton was cultivated throughout the warmer regions in Asia and the Americas.
India's cotton-processing sector gradually declined during British expansion in India and the establishment of colonial rule during the late 18th and early 19th centuries. This was largely due to aggressive colonialist mercantile policies of the British East India Company, which made cotton processing and manufacturing workshops in India uncompetitive. Indian markets were increasingly forced to supply only raw cotton and were forced, by British-imposed law, to purchase manufactured textiles from Britain.

Industrial revolution in Britain

The advent of the Industrial Revolution in Britain provided a great boost to cotton manufacture, as textiles emerged as Britain's leading export. In 1738, Lewis Paul and John Wyatt, of Birmingham, England, patented the roller spinning machine, and the flyer-and-bobbin system for drawing cotton to a more even thickness using two sets of rollers that traveled at different speeds. Later, the invention of the spinning jenny in 1764 and Richard Arkwright's spinning frame (based on the roller spinning machine) in 1769 enabled British weavers to produce cotton yarn and cloth at much higher rates. From the late 18th century onwards, the British city of Manchester acquired the nickname "Cottonopolis" due to the cotton industry's omnipresence within the city, and Manchester's role as the heart of the global cotton trade. Production capacity in Britain and the United States was further improved by the invention of the cotton gin by the American Eli Whitney in 1793. Improving technology and increasing control of world markets allowed British traders to develop a commercial chain in which raw cotton fibers were (at first) purchased from colonial plantations, processed into cotton cloth in the mills of Lancashire, and then exported on British ships to captive colonial markets in West Africa, India, and China (via Shanghai and Hong Kong).
By the 1840s, India was no longer capable of supplying the vast quantities of cotton fibres needed by mechanized British factories, while shipping bulky, low-price cotton from India to Britain was time-consuming and expensive. This, coupled with the emergence of American cotton as a superior type (due to the longer, stronger fibers of the two domesticated native American species, Gossypium hirsutum and Gossypium barbadense), encouraged British traders to purchase cotton from plantations in the United States and the Caribbean. By the mid 19th century, "King Cotton" had become the backbone of the southern American economy. In the United States, cultivating and harvesting cotton became the leading occupation of slaves.
During the American Civil War, American cotton exports slumped due to a Union blockade on Southern ports, also because of a strategic decision by the Confederate government to cut exports, hoping to force Britain to recognize the Confederacy or enter the war, prompting the main purchasers of cotton, Britain and France to turn to Egyptian cotton. British and French traders invested heavily in cotton plantations and the Egyptian government of Viceroy Isma'il took out substantial loans from European bankers and stock exchanges. After the American Civil War ended in 1865, British and French traders abandoned Egyptian cotton and returned to cheap American exports, sending Egypt into a deficit spiral that led to the country declaring bankruptcy in 1876, a key factor behind Egypt's annexation by the British Empire in 1882.
Prisoners farming cotton under the trusty system in Parchman Farm, Mississippi - 1911
Picking cotton in Georgia, United States, in 1943
Cotton exhibit at the Louisiana State Exhibit Museum in Shreveport, Louisiana has been a major cotton producer.
During this time, cotton cultivation in the British Empire, especially India, greatly increased to replace the lost production of the American South. Through tariffs and other restrictions, the British government discouraged the production of cotton cloth in India; rather, the raw fiber was sent to England for processing. The Indian patriot Mahatma Gandhi described the process:
  1. English people buy Indian cotton in the field, picked by Indian labor at seven cents a day, through an optional monopoly.
  2. This cotton is shipped on British ships, a three-week journey across the Indian Ocean, down the Red Sea, across the Mediterranean, through Gibraltar, across the Bay of Biscay and the Atlantic Ocean to London. One hundred per cent profit on this freight is regarded as small.
  3. The cotton is turned into cloth in Lancashire. You pay shilling wages instead of Indian pennies to your workers. The English worker not only has the advantage of better wages, but the steel companies of England get the profit of building the factories and machines. Wages; profits; all these are spent in England.
  4. The finished product is sent back to India at European shipping rates, once again on British ships. The captains, officers, sailors of these ships, whose wages must be paid, are English. The only Indians who profit are a few lascars who do the dirty work on the boats for a few cents a day.
  5. The cloth is finally sold back to the kings and landlords of India who got the money to buy this expensive cloth out of the poor peasants of India who worked at seven cents a day. (Fisher 1932 pp 154–156)
In the United States, Southern cotton provided capital for the continuing development of the North. The cotton produced by enslaved African Americans not only helped the South, but also enriched Northern merchants. Much of the Southern cotton was transshipped through the northern ports.
Cotton remained a key crop in the Southern economy after emancipation and the end of the Civil War in 1865. Across the South, sharecropping evolved, in which free black farmers and landless white farmers worked on white-owned cotton plantations of the wealthy in return for a share of the profits. Cotton plantations required vast labor forces to hand-pick cotton, and it was not until the 1950s that reliable harvesting machinery was introduced into the South (prior to this, cotton-harvesting machinery had been too clumsy to pick cotton without shredding the fibers). During the early 20th century, employment in the cotton industry fell, as machines began to replace laborers, and the South's rural labor force dwindled during the First and Second World Wars. Today, cotton remains a major export of the southern United States, and a majority of the world's annual cotton crop is of the long-staple American variety.[8]

Tangüis cotton

Fermín Tangüis poses with an example of the "Tangüis cotton"
In 1901, Peru's cotton industry suffered because of a fungus plague caused by a plant disease known as "cotton wilt" or, more correctly, "fusarium wilt", caused by the fungus Fusarium vasinfectum.[9] The plant disease, which spread throughout Peru, entered plant's roots and worked its way up the stem until the plant was completely dried up. Fermín Tangüis, a Puerto Rican agriculturist who lived in Peru, studied some species of the plant that were affected by the disease to a lesser extent and experimented in germination with the seeds of various cotton plants. In 1911, after 10 years of experimenting and failures, Tangüis was able to develop a seed which produced a superior cotton plant resistant to the disease. The seeds produced a plant that had a 40% longer (between 29 mm and 33 mm) and thicker fiber that did not break easily and required little water.[10] The Tangüis cotton, as it became known, is the variety which is preferred by the Peruvian national textile industry. It constituted 75% of all the Peruvian cotton production, both for domestic use and apparel exports. The Tangüis cotton crop was estimated at 225,000 bales that year.[11]

Cultivation

Cotton plowing in Togo, 1928
Harvested cotton in Tennessee (2006)
Cotton modules in Australia (2007)
Successful cultivation of cotton requires a long frost-free period, plenty of sunshine, and a moderate rainfall, usually from 600 to 1200 mm (24 to 48 inches). Soils usually need to be fairly heavy, although the level of nutrients does not need to be exceptional. In general, these conditions are met within the seasonally dry tropics and subtropics in the Northern and Southern hemispheres, but a large proportion of the cotton grown today is cultivated in areas with less rainfall that obtain the water from irrigation. Production of the crop for a given year usually starts soon after harvesting the preceding autumn. Planting time in spring in the Northern hemisphere varies from the beginning of February to the beginning of June. The area of the United States known as the South Plains is the largest contiguous cotton-growing region in the world. While dryland (non-irrigated) cotton is successfully grown in this region, consistent yields are only produced with heavy reliance on irrigation water drawn from the Ogallala Aquifer. Since cotton is somewhat salt and drought tolerant, this makes it an attractive crop for arid and semiarid regions. As water resources get tighter around the world, economies that rely on it face difficulties and conflict, as well as potential environmental problems.[12][13][14][15][16] For example, improper cropping and irrigation practices have led to desertification in areas of Uzbekistan, where cotton is a major export. In the days of the Soviet Union, the Aral Sea was tapped for agricultural irrigation, largely of cotton, and now salination is widespread.[15][16]

Genetic modification

Genetically modified (GM) cotton was developed to reduce the heavy reliance on pesticides. The bacterium Bacillus thuringiensis (Bt) naturally produces a chemical harmful only to a small fraction of insects, most notably the larvae of moths and butterflies, beetles, and flies, and harmless to other forms of life. The gene coding for Bt toxin has been inserted into cotton, causing cotton to produce this natural insecticide in its tissues. In many regions, the main pests in commercial cotton are lepidopteran larvae, which are killed by the Bt protein in the transgenic cotton they eat. This eliminates the need to use large amounts of broad-spectrum insecticides to kill lepidopteran pests (some of which have developed pyrethroid resistance). This spares natural insect predators in the farm ecology and further contributes to noninsecticide pest management.
Bt cotton is ineffective against many cotton pests, however, such as plant bugs, stink bugs, and aphids; depending on circumstances it may still be desirable to use insecticides against these. A 2006 study done by Cornell researchers, the Center for Chinese Agricultural Policy and the Chinese Academy of Science on Bt cotton farming in China found that after seven years these secondary pests that were normally controlled by pesticide had increased, necessitating the use of pesticides at similar levels to non-Bt cotton and causing less profit for farmers because of the extra expense of GM seeds.[17] However a more recent 2009 study by the Chinese Academy of Sciences, Stanford University and Rutgers University refutes this.[18] They concluded that the GM cotton effectively controlled bollworm. The secondary pests were mostly miridae (plant bugs) whose increase was related to local temperature and rainfall and only continued to increase in half the villages studied. Moreover, the increase in insecticide use for the control of these secondary insects was far smaller than the reduction in total insecticide use due to Bt cotton adoption. The International Service for the Acquisition of Agri-biotech Applications (ISAAA) said that, worldwide, GM cotton was planted on an area of 16 million hectares in 2009.[19] This was 49% of the worldwide total area planted in cotton. The U.S. cotton crop was 93% GM in 2010[20] and the Chinese cotton crop was 68% GM in 2009.[21]
The initial introduction of GM cotton proved to be a huge success in Australia - the yields were equivalent to the no transgenic varieties and the crop used much less pesticide to produce (85% reduction).[22] The subsequent introduction of a second variety of GM cotton led to increases in GM cotton production until 95% of the Australian cotton crop was GM in 2009.[19]
Cotton has also been genetically modified for resistance to glyphosate (marketed as Roundup in North America), an inexpensive and highly effective, but broad-spectrum herbicide. Originally, it was only possible to achieve glyphosate resistance when the plant was young, but with the development of Roundup Ready Flex, it is possible to achieve glyphosate resistance much later in the growing season.
GM cotton acreage in India continues to grow at a rapid rate, increasing from 50,000 hectares in 2002 to 8.4 million hectares in 2009. The total cotton area in India was 9.6 million hectares (the largest in the world or, about 35% of world cotton area), so GM cotton was grown on 87% of the cotton area in 2009.[21] This makes India the country with the largest area of GM cotton in the world, surpassing China (3.7 million hectares in 2009). The major reasons for this increase is a combination of increased farm income ($225/ha) and a reduction in pesticide use to control the cotton bollworm.
Cotton has gossypol, a toxin that makes it inedible. However, scientists have silenced the gene that produces the toxin, making it a potential food crop.[23]

Organic production

Organic cotton is generally understood as cotton, from plants not genetically modified, that is certified to be grown without the use of any synthetic agricultural chemicals, such as fertilizers or pesticides.[24] Its production also promotes and enhances biodiversity and biological cycles.[25] United States cotton plantations are required to enforce the National Organic Program (NOP). This institution determines the allowed practices for pest control, growing, fertilizing, and handling of organic crops.[26][27] As of 2007, 265,517 bales of organic cotton were produced in 24 countries, and worldwide production was growing at a rate of more than 50% per year.[28]

Pests and weeds

Hoeing a cotton field to remove weeds, Greene County, Georgia, USA, 1941
The cotton industry relies heavily on chemicals, such as fertilizers and insecticides, although a very small number of farmers are moving toward an organic model of production, and organic cotton products are now available for purchase at limited locations. These are popular for baby clothes and diapers. Under most definitions, organic products do not use genetic engineering.
Historically, in North America, one of the most economically destructive pests in cotton production has been the boll weevil. Due to the US Department of Agriculture's highly successful Boll Weevil Eradication Program (BWEP), this pest has been eliminated from cotton in most of the United States. This program, along with the introduction of genetically engineered Bt cotton (which contains a bacterial gene that codes for a plant-produced protein that is toxic to a number of pests such as cotton bollworm and pink bollworm), has allowed a reduction in the use of synthetic insecticides.
Other significant global pests of cotton include the pink bollworm, Pectinophora gossypiella; the chili thrips, Scirtothrips dorsalis; and the cotton seed bug, Oxycarenus hyalinipennis.

Harvesting

Offloading freshly harvested cotton into a module builder in Texas; previously built modules can be seen in the background
Cotton being picked by hand in India, 2005.
Most cotton in the United States, Europe, and Australia is harvested mechanically, either by a cotton picker, a machine that removes the cotton from the boll without damaging the cotton plant, or by a cotton stripper, which strips the entire boll off the plant. Cotton strippers are used in regions where it is too windy to grow picker varieties of cotton, and usually after application of a chemical defoliant or the natural defoliation that occurs after a freeze. Cotton is a perennial crop in the tropics, and without defoliation or freezing, the plant will continue to grow.
Cotton continues to be picked by hand in developing countries.[29]

Competition from synthetic fibers

The era of manufactured fibers began with the development of rayon in France in the 1890s. Rayon is derived from a natural cellulose and cannot be considered synthetic, but requires extensive processing in a manufacturing process, and led the less expensive replacement of more naturally derived materials. A succession of new synthetic fibers were introduced by the chemicals industry in the following decades. Acetate in fiber form was developed in 1924. Nylon, the first fiber synthesized entirely from petrochemicals, was introduced as a sewing thread by DuPont in 1936, followed by DuPont's acrylic in 1944. Some garments were created from fabrics based on these fibers, such as women's hosiery from nylon, but it was not until the introduction of polyester into the fiber marketplace in the early 1950s that the market for cotton came under threat.[30] The rapid uptake of polyester garments in the 1960s caused economic hardship in cotton-exporting economies, especially in Central American countries, such as Nicaragua, where cotton production had boomed tenfold between 1950 and 1965 with the advent of cheap chemical pesticides. Cotton production recovered in the 1970s, but crashed to pre-1960 levels in the early 1990s.[31]
Beginning as a self-help program in the mid-1960s, the Cotton Research and Promotion Program (CRPP) was organized by U.S. cotton producers in response to cotton's steady decline in market share. At that time, producers voted to set up a per-bale assessment system to fund the program, with built-in safeguards to protect their investments. With the passage of the Cotton Research and Promotion Act of 1966, the program joined forces and began battling synthetic competitors and re-establishing markets for cotton. Today, the success of this program has made cotton the best-selling fiber in the U.S. and one of the best-selling fibers in the world.
Administered by the Cotton Board and conducted by Cotton Incorporated, the CRPP works to greatly increase the demand for and profitability of cotton through various research and promotion activities. It is funded by U.S. cotton producers and importers.

Uses

Cotton is used to make a number of textile products. These include terrycloth for highly absorbent bath towels and robes; denim for blue jeans; chambray, popularly used in the manufacture of blue work shirts (from which we get the term "blue-collar"); and corduroy, seersucker, and cotton twill. Socks, underwear, and most T-shirts are made from cotton. Bed sheets often are made from cotton. Cotton also is used to make yarn used in crochet and knitting. Fabric also can be made from recycled or recovered cotton that otherwise would be thrown away during the spinning, weaving, or cutting process. While many fabrics are made completely of cotton, some materials blend cotton with other fibers, including rayon and synthetic fibers such as polyester. It can either be used in knitted or woven fabrics, as it can be blended with elastine to make a stretchier thread for knitted fabrics, and apparel such as stretch jeans.
In addition to the textile industry, cotton is used in fishnets, coffee filters, tents, gunpowder (see nitrocellulose), cotton paper, and in bookbinding. The first Chinese paper was made of cotton fiber. Fire hoses were once made of cotton.
The cottonseed which remains after the cotton is ginned is used to produce cottonseed oil, which, after refining, can be consumed by humans like any other vegetable oil. The cottonseed meal that is left generally is fed to ruminant livestock; the gossypol remaining in the meal is toxic to monogastric animals. Cottonseed hulls can be added to dairy cattle rations for roughage. During the American slavery period, cotton root bark was used in folk remedies as an abortifacient, that is, to induce a miscarriage.[32]
Cotton linters are fine, silky fibers which adhere to the seeds of the cotton plant after ginning. These curly fibers typically are less than 1/8 in (3 mm) long. The term also may apply to the longer textile fiber staple lint as well as the shorter fuzzy fibers from some upland species. Linters are traditionally used in the manufacture of paper and as a raw material in the manufacture of cellulose. In the UK, linters are referred to as "cotton wool". This can also be a refined product (absorbent cotton in U.S. usage) which has medical, cosmetic and many other practical uses. The first medical use of cotton wool was by Dr. Joseph Sampson Gamgee at the Queen's Hospital (later the General Hospital) in Birmingham, England.
Shiny cotton is a processed version of the fiber that can be made into cloth resembling satin for shirts and suits. However, it is hydrophobic (does not absorb water easily), which makes it unfit for use in bath and dish towels (although examples of these made from shiny cotton are seen).
The term Egyptian cotton refers to the extra long staple cotton grown in Egypt and favored for the luxury and upmarket brands worldwide. During the U.S. Civil War, with heavy European investments, Egyptian-grown cotton became a major alternate source for British textile mills. Egyptian cotton is more durable and softer than American Pima cotton, which is why it is more expensive. Pima cotton is American cotton that is grown in the southwestern states of the U.S.

International trade

Worldwide cotton production
Cottonseed output in 2005
The largest producers of cotton, currently (2009), are China and India, with annual production of about 34 million bales and 24 million bales, respectively; most of this production is consumed by their respective textile industries. The largest exporters of raw cotton are the United States, with sales of $4.9 billion, and Africa, with sales of $2.1 billion. The total international trade is estimated to be $12 billion. Africa's share of the cotton trade has doubled since 1980. Neither area has a significant domestic textile industry, textile manufacturing having moved to developing nations in Eastern and South Asia such as India and China. In Africa, cotton is grown by numerous small holders. Dunavant Enterprises, based in Memphis, Tennessee, is the leading cotton broker in Africa, with hundreds of purchasing agents. It operates cotton gins in Uganda, Mozambique, and Zambia. In Zambia, it often offers loans for seed and expenses to the 180,000 small farmers who grow cotton for it, as well as advice on farming methods. Cargill also purchases cotton in Africa for export.
The 25,000 cotton growers in the United States of America are heavily subsidized at the rate of $2 billion per year. The future of these subsidies is uncertain and has led to anticipatory expansion of cotton brokers' operations in Africa. Dunavant expanded in Africa by buying out local operations. This is only possible in former British colonies and Mozambique; former French colonies continue to maintain tight monopolies, inherited from their former colonialist masters, on cotton purchases at low fixed prices.[33]

Leading producer countries

Top ten cotton producers — 2009
(480-pound bales)
 People's Republic of China 32.0 million bales
 India 23.5 million bales
 United States 12.4 million bales
 Pakistan 10.8 million bales
 Brazil 5.5 million bales
 Uzbekistan 4.4 million bales
 Australia 1.8 million bales
 Turkey 1.7 million bales
 Turkmenistan 1.1 million bales
 Syria 1.0 million bales
Source:[34]
The five leading exporters of cotton in 2009 are (1) the United States, (2) India, (3) Uzbekistan, (4) Pakistan, and (5) Brazil. The largest nonproducing importers are Korea, Russia, Taiwan, Japan, and Hong Kong.[34]
In India, the states of Maharashtra (26.63%), Gujarat (17.96%) and Andhra Pradesh (13.75%) and also Madhya Pradesh are the leading cotton producing states,[35] these states have a predominantly tropical wet and dry climate.
In Pakistan, cotton is grown predominantly in the provinces of Punjab and Sindh. The leading city in cotton production is the Punjabi city of Faisalabad which is also leading in textiles within Pakistan. The Punjab has a tropical wet and dry climate throughout the year therefore enhancing the growth of cotton.
In the United States, the state of Texas led in total production as of 2004,[36] while the state of California had the highest yield per acre.[37]

Fair trade

Cotton is an enormously important commodity throughout the world. However, many farmers in developing countries receive a low price for their produce, or find it difficult to compete with developed countries.
This has led to an international dispute (see United States – Brazil cotton dispute):
On 27 September 2002, Brazil requested consultations with the US regarding prohibited and actionable subsidies provided to US producers, users and/or exporters of upland cotton, as well as legislation, regulations, statutory instruments and amendments thereto providing such subsidies (including export credits), grants, and any other assistance to the US producers, users and exporters of upland cotton.[38] On 8 September 2004, the Panel Report recommended that the United States "withdraw" export credit guarantees and payments to domestic users and exporters, and "take appropriate steps to remove the adverse effects or withdraw" the mandatory price-contingent subsidy measures.[39]
In addition to concerns over subsidies, the cotton industries of some countries are criticized for employing child labor and damaging workers' health by exposure to pesticides used in production. The Environmental Justice Foundation has campaigned against the prevalent use of forced child and adult labor in cotton production in Uzbekistan, the world's third largest cotton exporter.[40] The international production and trade situation has led to "fair trade" cotton clothing and footwear, joining a rapidly growing market for organic clothing, fair fashion or so-called "ethical fashion". The fair trade system was initiated in 2005 with producers from Cameroon, Mali and Senegal.[41]

Trade

Cotton is bought and sold by investors and price speculators as a tradable commodity on 2 different stock exchanges in the United States of America .
  • Cotton futures contracts are traded on the New York Mercantile Exchange (NYMEX) under the ticker symbol TT. They are delivered every year in March, May, July, October, and December.[42]
  • Cotton #2 futures contracts are traded on the New York Board of Trade (NYBOT) under the ticker symbol CT. They are delivered every year in March, May, July, October, and December.[43]

Critical temperatures

Cotton dries out, becomes hard and brittle and loses all elasticity at temperatures above 25°C (77°F). Extended exposure to light causes similar problems.
A temperature range of 25°C (77°F) to 35°C (95°F) is the optimal range for mold development. At temperatures below 0°C (32°F), rotting of wet cotton stops. Damaged cotton is sometimes stored at these temperatures to prevent further deterioration.[44]

British standard yarn measures

  • 1 thread = 55 inches (about 137 cm)
  • 1 skein or rap = 80 threads (120 yards or about 109 m)
  • 1 hank = 7 skeins (840 yards or about 768 m)
  • 1 spindle = 18 hanks (15,120 yards or about 13.826 km)

Fiber properties

Property Evaluation
Shape Fairly uniform in width, 12-20 micrometers; length varies from 1 cm to 6 cm (½ to 2½ inches); typical length is 2.2 cm to 3.3 cm (⅞ to 1¼ inches).
Luster high
Tenacity (strength)
Dry
Wet

3.0-5.0 g/d
3.3-6.0 g/d
Resiliency low
Density 1.54-1.56 g/cm³
Moisture absorption
raw: conditioned
saturation
mercerized: conditioned
saturation

8.5%
15-25%
8.5-10.3%
15-27%+
Dimensional stability good
Resistance to
acids
alkali
organic solvents
sunlight
microorganisms
insects

damage, weaken fibers
resistant; no harmful effects
high resistance to most
Prolonged exposure weakens fibers.
Mildew and rot-producing bacteria damage fibers.
Silverfish damage fibers.
Thermal reactions
to heat
to flame

Decomposes after prolonged exposure to temperatures of 150˚C or over.
Burns readily.
The chemical composition of cotton is as follows:

Cotton genome

A public genome sequencing effort of cotton was initiated [45] in 2007 by a consortium of public researchers. They agreed on a strategy to sequence the genome of cultivated, tetraploid cotton. "Tetraploid" means that cultivated cotton actually has two separate genomes within its nucleus, referred to as the A and D genomes. The sequencing consortium first agreed to sequence the D-genome relative of cultivated cotton (G. raimondii, a wild Central American cotton species) because of its small size and limited number of repetitive elements. It is nearly one-third the number of bases of tetraploid cotton (AD), and each chromosome is only present once.[clarification needed] The A genome of G. arboreum would be sequenced next. Its genome is roughly twice the size of G. raimondii's. Part of the difference in size between the two genomes is the amplification of retrotransposons (GORGE). Once both diploid genomes are assembled, then research could begin sequencing the actual genomes of cultivated cotton varieties. This strategy is out of necessity; if one were to sequence the tetraploid genome without model diploid genomes, the euchromatic DNA sequences of the AD genomes would co-assemble and the repetitive elements of AD genomes would assembly independently into A and D sequences respectively. Then there would be no way to untangle the mess of AD sequences without comparing them to their diploid counterparts.
The public sector effort continues with the goal to create a high-quality, draft genome sequence from reads generated by all sources. The public-sector effort has generated Sanger reads of BACs, fosmids, and plasmids as well as 454 reads. These later types of reads will be instrumental in assembling an initial draft of the D genome. In 2010, two companies (Monsanto and Illumina), completed enough Illumina sequencing to cover the D genome of G. raimondii about 50x[clarification needed]. They announced that they would donate their raw reads to the public. This public relations effort gave them some recognition for sequencing the cotton genome. Once the D genome is assembled from all of this raw material, it will undoubtedly assist in the assembly of the AD genomes of cultivated varieties of cotton, but a lot of hard work remains.

No comments:

Post a Comment